Saladettes on Standard Depth 2 Drawer Units - Side Engine - VCS2 SERIES

Under Counter Single Drawer + Solid Worktop VCR1/CT
Standard Depth Two Drawer Unit 
with Standard Saladette (S2)
VCS2/CW/S2 (Pictured)
Standard Castors (C)
Solid Worktop (W)
Standard Saladette (S2)

 

 

 

 

Under-Counter Standard Depth Single Drawer + Cover Top HCR1/CT
Standard Depth Two Drawer Unit 
with Large Saladette (S3)
VCS2/CW/S3 (Pictured)
Standard Castors (C)
Solid WorkTop (W)
Large Saladette (S2)

 

 

 

 

 

 

Storage Capacity

Gastronorm (GN) Pans
4 x 1/1 GN pans
100 mm Deep
or equivalent

Maximum Weight
40 Kg of Food

Volume
86 Litres

Blast Chill

For added functionality a Blast Chill (BC) option is available for the bottom Drawer of any VCS2 Saladette unit.

Applications

  • Bulk storage right at the point of use.
  • Final presentation of plates on the Pass.
  • Pizza preparation.
  • Sushi storage and preparation.
  • Salad and garnish storage.

Temperature Flexibility

(Bottom Drawer Only)
Foods can be stored at the optimum set point anywhere in the range:
Temperature Flexibility

Refrigerant & Operation

Saladette 'host' Drawers operate on refrigerant HFC R404a, but only in fridge mode.

Chefs have the option of using the 'host' Drawer with the Saladette unit switched on or off

Food items can be held in the Saladette unit anywhere in the range +15°C to 0°C

Top Drawer

Acts as the Saladette 'host' unit and operates only as a Fridge in the range:
A+ Fridge Temperature Flexibility

Electrical

Mains Supply
230 Vac 50 Hz

Power Socket (included)
Correct 2 or 3 Pin Plug
fitted for each country

Mains Lead (included)
2 Metre Coiled Lead

 

 

 

OPTIONS (Note: Due to rounding differences, the dimensions for Drawer Module + Top + Base may vary by 1 mm compared to the dimensions shown below)

Double Drawer Saladette Specifications

For a higher or lower worktop, alternative castor or roller base options are available on request

S2 SALADETTE Standard Castor Base (C)
Small Castor Base (SC)
VCR1/SCW
Finished Height with Solid Worktop (W) 900 mm VCR1/CW
  842 mm VCR1/CW
S2 Saladette Capacity 5 x 1/3 GN Pans equivalent
Worktop & Plating Up Depth Options
(Depth Options are FOC) S2 Saladette - PLATING UP SPACE OPTIONS
Worktop Depth Options 740 mm  Code: S2 800 mm Code: S2-800 850 mm Code: S2-850
Worktop Plating Up Depth 350 mm    410 mm   460 mm
 

 

S3 SALADETTE Standard Castor Base (C)
Finished Height with Solid Worktop (W) 900 mm VSS2/CW/S3
  842 mm VSS2/CW/S3
S3 Saladette Capacity 7 x 1/3 GN Pans equivalent
Worktop & Plating Up Depth Options
(Depth Options are FOC) S3 Saladette - PLATING UP SPACE OPTIONS
Worktop Depth Options 740 mm  Code: S3 800 mm Code: S3-800 850 mm Code: S3-850
Worktop Plating Up Depth 185 mm    245 mm   295 mm  

Saladettes - Side Engine - VCS2 SERIES SPECS

Saladettes 2 Drawer Units - Side Engine VCS2 EU Energy Rating

Standard Drawer (VCS R2)